Showing posts with label linux. Show all posts
Showing posts with label linux. Show all posts

Sunday, February 3, 2013

How to get Netflix streaming on Ubuntu 12.10

Linux users, no more having to depend upon streaming devices or watching Netflix on your WII or PS3.Netflix streaming is now available for the Ubuntu 12.10 desktop.

The credit for Netflix app goes to Erich Hoover.Eric Hoover has recently developed Netflix Desktop, an application that lets you watch Netflix streaming videos on your Ubuntu 12.10 PC.

Author's Note: I developed the procedures below on my Ubuntu 12.10 PC. I could install and configure Netflix Desktop only on Ubuntu 12.10; I could not install and configure Netflix Desktop on my Ubuntu 12.04 PC.



Before you tackle this task, make sure your machine is fully updated. You can either do this from the update manager or from the command line. If from the command line, do the following:

  • Open a terminal window

  • Issue the command sudo apt-get update

  • Enter your sudo password

  • Once the update completes, issue the command sudo apt-get upgrade

  • Accept the updates

  • If prompted (in case of a kernel upgrade), reboot the machine


Installing Netfllix Desktop

To install the Netflix Desktop for Ubuntu application on your Ubuntu 12.10 PC, do the following:

  • Click "Dash Home" to display Dash, and then type "ter" into the search field to display the Terminal icon.

  • Click "Terminal" to display it and its $ prompt, which is followed by a text-insertion point.

  • Type "sudo apt-add-repository ppa:ehoover/compholio" press "Enter," type your password and then press "Enter."

  • After the PPA message (You are about to add the following PPA to your system), press "Enter" and then wait for the $ prompt.

  • Type "sudo apt-get update", press "Enter" and then wait for the $ prompt.

  •  Type "sudo apt-get install netflix-desktop", press "Enter."

Configure Netflix Desktop according to the next section below. 


Configuring Netflix Desktop

 To configure Netflix Desktop, do the following:

  • Install Netflix Desktop according to the previous section above.

  • After the prompt (Do you want to continue [Y/n]?), type "y", and then press "Enter," to display the first Package-configuration window (Microsoft license agreement).

  • Use the "Tab" key to select (highlight) "OK," press Enter to display the second Package-configuration window, use the "Tab" key to select "Yes," press "Enter" and then wait for the $ prompt.

  • Type "sudo netflix-desktop", press "Enter," type your password, press "Enter" and then wait for the Wine Mono Installer window.

  • Click "Install" and then wait for the Wine Gecko Installer window.

  • Click "Install" and then wait for Netflix to open for the first time.

  • Press F11 to exit full-screen mode, click "Member Sign In" to display its dialog window as shown in the fifth image above. Note: Netflix Desktop always opens in the Firefox browser. Your default browser remains that which you have chosen, such as Chromium.

  • Disable (uncheck) "Remember me on this computer," enter your Email address and your Password, click "Continue" and then select a video to Watch Instantly.

     

    Source:Eric Hoover, "PPA for Netflix Desktop App", iheartubuntu.com website 

Thursday, January 10, 2013

Rise-of-Linux-gaming

When we see the gaming industry as it is today, we find that it has grown leaps and bounds but exactly this growth though it seems rapid has taken its own time to reach to the stage where we see it today. Linux, in spite of having several advantages over the other operating systems has really never been considered as an ideal gaming platform. The question remains why? But today we see that the gaming on Linux based platform is one the rise and in the edition we would tell you why so. Read on to discover few interesting and intricate details which you probably never knew.

linux games

Linux, the open source platform which is free to use, has slowly but gradually extended its share in the gaming market as well. We know as on date that the gaming market is fast money and can be considered as one of the most lucrative markets for businesses and entrepreneurs to thrive fast. Keeping in mind the advantages which Linux as a platform has over the other Operating system, it is much obvious that there is a much scope for it to develop as an ideal gaming platform as well. Considering Linux as the mainstream for gaming might take some time, as most of the games which we find today are developed for the windows based platform that is being used by maximum of the users as on date.

But not everyone wants to be a part of the crowd. Playing like what everyone else is doing might not be liked by all and is quite natural for some to want to play on a slightly different platform. Looking for a difference is the prime base for gradual transition which is happening in the gaming industry from Windows to Linux. Though the shift is very slow and gradual and would take time to be conspicuous enough, but the movement has started. Linux based gaming also has several advantages. Let’s discuss about them in brief in this edition.

To start with, the prime attraction is the fact that all the games which are played on the Linux based platform are free in nature and hence does not affect your wallets. As these games are programmed based on the open source platform, these would be free to the consumers making it an ideal option for those who spend huge in games while playing on the windows based platforms. This actually implies that you never need to consider which game to play as you are not spending anything on it anyway. Hence in case you play a game and then find it is not worth it, you just simply have to shun t and move to the next option which lies in front of you. This is unlike what it would be had you purchased or be paying for the game while playing those which are based on the windows based platform. Hence it’s a win-win situation when you play Linux bases games in comparison to the windows based games.


Next, Linux can be an ideal operation to run and is far better and efficient than the other operating systems. This implies that you can easily play better and advanced games on your hardware even if it is an old system and would not have to opt for modernized and upgraded systems with higher end OS which again saves you money. Instead the older the machine, the better the performance you stand to get while you use the Linux based platform.

In addition to the above you also stand to choose from a wide array of games due to the innumerable choices which have recently come up in the domain of Linux. You get to see various kinds of games which are present in the market for the Linux based platform starting from the simple models to the latest 3 dimension totally commercial games. You are sure to find something that you would enjoy playing from this wide array of choices.

Next the prime aspect which has been responsible for the evolution of Linux gaming is the fact that it requires no licensing. Most of the game which we see today needs to be purchased, though some can be even played freely. Even after purchasing, they have a wide number of restrictions like you would not be able to install the game more than some specific number, the game is restricted to be run in only one machine, as soon as you think of installing it on the other, it would not allow you to do so, etc. But with Linux based gaming, you are sure not to have any of these kind of problems or restrictions. You can easily install these Linux based games on any computers, and innumerable number of times with no restriction whatsoever.

Moreover some games also have communities which would enable you to interact with other players as well. Hence due to all these features, individuals are slowly shifting towards the Linux based gaming.

Image Courtesy LatestWebCrunch

Wednesday, June 27, 2012

Ubuntu 12.04 - A sneak peek into its new features

Just within a span of three months of the release of the alpha version of Ubuntu, Linux 12.04, the developers of this project brought about its beta version operating system. Ubuntu is basically an operating system that is built on 'Debian-Linix' platform and is available as open source software. This OS has its own desktop environment. Though it focuses primarily on desktop PC uses, it's also used for servers and for cloud-computing. 

Many users who had been using Ubuntu 12.04's alpha version have been relieved to see the latest updates in the beta version. Several new features and improvements have been made in its beta version. As this is an open source platform, hence it has 'n' number of contributors who keep working on the same, bringing about various changes. All these get consolidated in the form of beta version, and are brought out in the markets for the end users once the changes have been approved. Let's take a quick sneak peek into the new editions which have come up in Ubuntu. 

Changes have been made to the home screen where now recent-applications appear first before the recent-files, followed by recent-downloads making it all the more useful. Compensating for the loss of its old home screen, unity-dash now has the 'quick lists-support' which is really awesome. 

The new home-folder-quick list edition exhibits the fact that the programming authorities do consider the feedback given by the end users and try their best to implement or bring in changes for their benefit. The home menu option created is really a beneficial addition to this Ubuntu OS. 

Apart from this, there is an all new video lens with a default HUD with several changes made to the same, but do not panic as there has been no changes made to the application menu. Further to this, the launcher icon can easily be re-sized directly from the wallpaper option; hence you no longer need CCSM to be installed. There is also an option for changing the theme of Ubuntu using the same window. Thus, editions have been incorporated quite well. Next, the auto-hiding facility has been activated for the launcher by setting the same, using the behavior tab and finally there comes a big good-bye to Banshee which has now been replaced by Rhythm box in the 12.04 version. It seems that the authorities are really serious in getting Ubuntu used by majority, hence is also seriously considering removing Mono from Ubuntu OS.

Thursday, April 26, 2012

10 features Ubuntu 12.04 that will Rock


BY Jack Wallen

Ubuntu 12.04 is almost here (April 26, 2012). Canonical has some serious plans for its flagship platform, and Precise Pangolin has both some big changes and some minor changes that will make a huge difference in how people feel about Unity and the Linux desktop in general. Although some of the major changes won’t be immediately apparent, some of the minor ones will be quickly evident and worth examining.
Let’s take a look at 10 of the features and changes I believe will make a big impact on the way users view Ubuntu.

1: HUD
The Head-Up Display, to me, is a big one simply because it integrates application menus into the desktop UI. With an application open, hit the Alt key to bring up the HUD. When the HUD is open, you can search your application menus based on keywords. For example, if you have LibreOffice open, you can open the HUD, do a search for Format, and all menu entries relating to Format will appear in a list for you to select from. This means no more bouncing back and forth from keyboard to mouse to poke through application menus.

2: New privacy tool
Because the new iteration of Unity records all your recent history, the addition of a privacy tool was necessary. With this tool you can determine exactly what Unity records and what it doesn’t. You can turn recording off to completely disable the feature or you can specify what files and applications it can record.

3: Launchbar
A few nice touches to the Launchbar make a difference. The first is that the Launchbar can now be set to auto-hide. When enabled, this gives Unity a bit more of a GNOME 3 look and feel. Another addition is the ability to resize icons. No more dealing with the oversize icons that make the Launchbar look like a child’s toy. And finally, the Launchbar is no longer set with the dodge window behavior. This caused a lot of issues when interacting with certain applications. The default behavior now is always on top.

4: Change to Unity Dash
The Unity Dash’s default home screen has changed the order in which things appear. This is not a huge change, but it will go a long way toward making Unity more efficient. Now, the Dash shows Recent Apps first, Recent Files next, and finally, Recent Downloads.

5: Quicklists
Although Quicklists aren’t new, additional lists will be available. What is a Quicklist? Simple. Quicklists allow you to right-click an icon in the Launcher and select from options. For example, in the Google Chrome Quicklist, you can right-click the icon and immediately open an incognito instance of Chrome. The new Quicklists for Unity are the Dash Quicklist and the Home Folder Quicklist. The Dash Quicklist includes Dash Home, Applications, Files and Folders, Music, and Videos. The Home Folder Quicklist includes Documents, Downloads, Music, Video, Open In New Window, Home Folder, and Unlock From Launcher.

6: Video Lens
Unity Lenses enable you to easily organize items in the Unity Dash. If you open the Video Lens, you can select and play videos from a variety of sources, such as those from your local collection, YouTube movies, BBC iPlayer, and TED Talks. Open the Lens, do a search, and click on the video you want to view. Simple. Efficient.

7: Rhythmbox default
Banshee has become plagued with problems. Because of this, Ubuntu is returning to Rhythmbox as the default music player. Although there is a bigger issue (at least from the perspective of Canonical), causing the removal of Banshee (more on that in a bit), many users will be happy to use the less crash-prone Rhythmbox for their music pleasure.
8: MyUnity
Ubuntu Unity will finally include a configuration tool for the desktop. This application was developed to provide full customization of Unity features, including the Unity Launcher, Dash, Panel, Desk, and Font. This tool was available for 11.04 and 11.10, but had to be installed from the Software Center. Now, MyUnity will be installed and ready for configuration by default.

9: Mono-free
It’s been a battle cry for some time now, but much of the Linux crowd will be pleased to know that with the removal of Tomboy and Banshee, Ubuntu is now Mono-free. Why is this important? Microsoft Patent Extortion. A patent deal was made between Microsoft and Novell that involved Mono. Because of this, many in the Linux community see Mono as proprietary software that should be relegated to the non-free repositories. But it goes deeper than that. If you dig into the verbiage of the agreement, you find that the only “safe” users of any Mono-dependent software are Novell customers.

10: Trackpad support
This one has been a long time coming. Owners of trackpads whose clickable button is built into the surface can now enjoy support for their device. Most new Synaptics trackpads are supported, as are Apple Macbook trackpads. Ubuntu 12.10 should also include support for Apple’s Magic Trackpads.

Better and better
The improvements just keep on coming for Ubuntu. I can honestly say I haven’t been this excited for a release of a distribution in a while. The HUD alone will be worth the price of admission with Ubuntu 12.04 (although there is no price). Canonical and Ubuntu are doing some incredible things with the Linux desktop. Even if you’re a naysayer, give Precise Pangolin a go and see if it doesn’t change your mind.


About Aurthor
A writer for more than 12 years, Jack's primary focus is on the Linux operating system and its effects on the open source and non-open source communities.


Saturday, September 24, 2011

Bitcoin version 0.4.0 released

Bitcoin is new decentralized P2P crypto -currency application.

According to Wikipedia , Internet Encyclopedia 
Bitcoin is an open-source project to develop a decentralized, peer-to-peer network that tracks and verifies transactions. Satoshi Nakamoto created Bitcoin in 2009 and described his work in a self-published paper.

There have been major changes made , Current  0.4.0  Focus more on  wallet private key encryption


BITCOIN 0.4.0 can be available from Following Link


Bitcoin

Facebook page of Bitcoin
http://www.facebook.com/bitcoins

Wednesday, August 24, 2011

Linux :Two Decades




The history of Linux is an interesting thing in its own right, and even more interesting when taken in context of the history of computing in general. The Linux Foundation has a number of events lined up to celebrate Linux’s 20th birthday, including a new 20th Anniversary Website and a video contest to be judged by Linux creator Linus Torvalds!
The Key to Linux's Sucess is that it came at the right time, right Place, and the right kind of environment.If for instance ,Richard Srallman hadn't set the base for creating a free operating system way back in1983,by creating the Free Software Foundation and all the components Required for an OS other than the Kernel. Linux would never have been created. Linux Torvalds completed the Last Piece of the Puzzle by creating the Kernel, and Later switched it to the GNU General Public License. Together GNU software ans the Linux Kernel formed a complete operating system that was free for everybody to use, modify, and distibute.
In fact, today Linux is the largest collaborative development project in the history of computing, which means that the 20th Anniversary of Linux is an opportunity for the community to come together in celebration of this great success story and in collaboration on how it will define the next 20 years of Linux.

We’re kicking things off with an exclusive video produced by The Linux Foundation that is one way to tell the Story of Linux:


We hope this video will inspire submissions for the annual Linux Foundation Video Contest,  for which Linux creator Linus Torvalds will choose the best. 


Friday, July 22, 2011

Linux kernal Gets Three Digit 3.0.0 RC1 , Microsoft Contributes Among Top Five on the Changes !!

Linus Torvalds announced an RC1 release of the next Linux kernel , but instead of calling it the expected Linux 2.6.40, it's dubbed Linux 3.0. The final Linux 3.0 will coincide with the 20th anniversary of Linux in August, but will offer no great breakthroughs, says Torvalds.

Torvalds posted the 3.0 RC1 as a 93 MB download on the kernel.org mailing list at about 6 pm PST, marking a major new phase for the open source operating system. There has been a debate for some time whether it was time to move up from the 2.6 versioning, possibly to 2.8, for some time. The general notion among Linux kernel contributors has been that it would be a good time to leave some of the old and no longer needed features behind along with the 2.6 version number.

Linus wrote on the Linux Kernel Mailing List, "3.0 will still be noticeably faster than 2.6.39 due to the other changes made (ie the read-ahead), so yes, the regression itself is fixed."

Linus also hinted that the next kernel will be 3.1, "This obviously also opens the merge window for the next kernel, which will be 3.1. The stable team will take the third digit, so 3.0.1 will be the first stable release based on 3.0."

Microsoft Contributes on Linux Kernal Changes!


It's strange. Microsoft has been patent trolling the heck out of the Linux kernel for a long time now, and is still using these patents against Android today in its protection money scheme. However, as LWN.net illustrates, Microsoft makes quite a few contributions to the Linux kernel. Shouldn't this invalidate their patent claims?

LWN.net regularly investigates and summarises the various contributions to the Linux kernel, making lists of who contributes the most. Now that version 3.0 of the Linux kernel is about to hit the big wide world, it was time for another one of these investigations.

Microsoft proposed a total of 361 changes to the Linux kernel, putting it in seventh place on the list of companies contributing the most to the kernel. To give you an idea - Red Hat provided 1000 changes, and Intel 839. Independent developers contributed 1085 change sets.

Read more 

What Are the Changes !!

Obviously, many can expect major changes from this new kernel numbers, but the truth is that version 3.0 of Linux will be a launch without any drastic change. Do not expect something as seen in GNOME KDE 3 or 4, is not this what Linus wants at the moment.

Any bug fixes will be there, some updates on the drivers too, but that's it. Do not expect changes in the API, do not expect new features, do not expect a long list of changes in the source code that may end up breaking other programs that make use of the kernel.

At the time, Torvalds is just really want to leave for a new version of Linux. And avoid the hundreds of problems that occur when a project is launching a new version ".0", with bugs, compatibility issues, and the like.




Thursday, July 21, 2011

US Department of Defence Have Own linux Distro .[download link available]

Lightweight Portable Security is a LiveCD distro designed by the US Department of Defense to purpose as a secure end node, in other words, a safe environment from which to access the web or a remote desktop host. The focus is on security, and for this reason, it boots from a CD and executes from RAM, providing a web browser, a file manager and a few other small tools.

The idea behind it is that government workers can use a CDROM or USB stick to boot into a tamper proof, pristine desktop when using insecure computers such as those available in hotels or a worker’s own home. The environment that it offers should be largely resistant to Internet-borne security threats such as viruses and spyware, particularly when launched from read-only media such as a CDROM. The LPS system does not mount the hard drive of the host machine, so leaves no trace of the user’s activities behind.

Light-weight Portable Protection (LPS) makes a safe conclude node from reliable media on nearly any Intel-based pc (Computer or Mac).

A new maintenance release was announced earlier this week and is accessible via the web. Changes: fixed a problem with iMac Radeon video drivers; fixed problem with trackpad not working on older MacBooks; Rdesktop - enabled compression to improve performance, fixed problem with cursor control keys not working properly; updated NVIDIA display driver to version 275.09.07; added UVC USB web camera support; added minicom 2.4 as a serial port terminal emulator under the Communications menu; updated Firefox to 3.6.19; updated DOD Configuration add-on to 1.3.1; updated Gmail S/MIME add-on to 0.5.2; updated Flash to 10.3.181.34."

 Screen shot






Thursday, February 19, 2009

Format a Hard Drive in Linux

Step1
When you format a computer hard drive, you will lose everything that is on the drive. Therefore it is very important to back up anything you might later want.

Step2
In order to format a secondary drive you will need root access. All commands used in this tutorial are run from a command line (terminal) as root. You may also want to make note of the size (total capacity in MB) of the drive.

Step3
Linux refers to hard drives as either “hdx” or “sdx” where x is a letter, starting with a, which represents the order in which the drive was added to or detected by the computer. The “hd” prefix is used for IDE and PATA (formerly just ATA), and the “sd” prefix is used for SCSI, SATA, and USB drives. Usually a number is also put at the end of “hdx” or “sdx” to denote different partitions on the same phisical drive, but for the purpose of formatting you only need to know which letter the drive you want to format is.

Step4
The examples given in this how-to are for a computer with two IDE hard drives attached as a master and slave. In this, the drives are “hda” and “hdb.” You will need to determine the letter of drive you want to format for your own setup. We will be formatting the drive hdb. For all examples, replace “hdb” with whatever your drive designation is.

Step5
You can see all the drives attached to you system by typing the command “ls /dev/hd*” or “ls /dev/sd*” depending on which type (IDE, SATA, etc.) the drives are. On the example system the result of this command looks like “/dev/hda /dev/hda1 /dev/hda2 /dev/hdb /dev/hdb1” The operating system is installed on hda, which has two partitions (hda1 and hda2), and there is one partition on hdb and hdb1.

Using fdisk

Step1
First you will use the fdisk command to erase any old partitions on the drive and create a new one. Any changes you make using fdisk are only made permanent if you then issue the “w” command before quitting, so feel free to play around a little if you like. If at any time you find yourself stuck, you can quit the program without saving changes by holding the "Ctrl" key and pressing "c."

Step2
At the command prompt, type “fdisk /dev/hdb” replacing the "hdb" with the letters for your drive. Upon opening, fdisk may give you a couple of warnings, all of which can be ignored. It then gives you a prompt that looks like this: Command (m for help):

Step3
Enter “p” to see the partition table of the drive. The first line of output from the “p” command will also tell you size of the drive. This is a good way to double check that you are working with the correct drive.

Step4
If there are any partitions already on the drive they will be listed as the last lines of the “p” command. On our example, this looks like “/dev/hdb1” followed by some information about the partition's size and file system.

Step5
To delete any existing partitions, press “d” then enter. It will ask you which partition number you wish to delete. The number of the partition is the number that follows hdb, so on our example system we enter 1. If there are multiple partitions repeat the “d” command for each one. You can always view the partition table again with the “p” command.

Step6
Once you have deleted all existing partitions on the drive you are ready to make a new one. Type “n” and hit enter. Then press “p” to create a primary partition. It asks you for a partition number, enter “1." Now you are asked which cylinder the partition should start at, the beginning of the drive is the default, so just hit Enter. Then you are asked for the last cylinder, the end of the drive is default so you can just press Enter again.

Step7
Now you are back at fdisk's command prompt. Use the “p” command to check the partition table. You should now see your new partition at the bottom of the output. In the example it lists “/dev/hdb1.”

Step8
You now need to set the filesystem type for your new partition with the “t” command. You are asked for the Hex code of the filesystem you wish to use. We wll use the standard Linux ext2 filesystem which is “83." If you are doing something special and know of a particular filesystem that you need to use, you can press “L” to see all the codes, which are one or two characters made up of the numbers 0-9 and the letters a-f.

Step9
Now just issue the “w” command to write your new partition table and exit fdisk.

Creating the New File System with mkfs

Step1
Now you need to create the filesystem on the drive. This is done with the “mkfs” command.

Step2
At the command prompt, enter “mkfs -t ext2 /dev/hdb1” while remembering to change the hdb1 to whatever the letters are for the partition you just created.

Step3
If you are using a different filesystem than ext2, you will have to specify that where "ext2" is in the above command.

Finalizing the Format with fsck

Step1
All that is left is to run a check on the drive and enter it into your fstab so that the drive mounts each time you start your computer. This can be done with a single fsck command.

Step2
At the command prompt, type “fsck -f -y /dev/hdb1” again replacing hdb1 with the letters and number for your partition.

Step3
After fsck runs, your new drive is formatted. Restart your system before using it.

Step4
If you reformatted your system drive, you will now need to boot off an installation disk to install an Operating system.

SOURCE:linux4u.com



































Thursday, November 6, 2008

Wars-of-browsers

There are the periods when Netscape & internet browser explore had the war for there place. Brits scientist sir Tim Berne less had never thought his 1991 which was renames Nerves would lead to origin a various change in 2008 World Wide Web.

Browsers are important tool for searching internet. Here I try to find which is great among




Fire Fox 3

Mozilla one of the failure browsers among the open sources users breaks the records by downloading 8 million in just 24 hours. Firebox has a simple 8 clean logout with light-weight 78MB. It is say 8 have rich a. it have various active security feature like (anti-phishing, pop-blocker, password managers, parental controls).

The area that lacks are speed & performance firebox is now of the blocks talking marginally longer. It takes about 1 to 14 at first startup & four to eight seconds to startup later.
Fire fox is great with its feature like bookmarks & history management, search engine integration & tabbed browsing. It is far ahead with thousands assours to pick. The manager is an easy way to in stall as sour by listing popular us without need to open a webpage.
Book-mark is done clicking star in the location tab change to golden means page is Booked.
Password manager is unobtrusive with a discreet toolbar shown instead of the dialog box that offers to remember passwords.
Spelling checking & searching on page is also well important.

Google Chrome

Every product has its important. When a goggle products comes then its goes to box in the web.
Since its logo looks like a pogo ball bat it has not left Google color.
Chrome is just easy to use simple & looks great. There is a tab bar in place of the little bar with no menu bar & tool bar cluttering the interface. The one thing in the address bar (also known as the amni bar) which doubles up as a search bar. when opening new tabs, chrome displays a preview of sites in the new tab which is like operas speed dial. There are no advance navigational options – only the forward/back/refresh.

Chrome is not loaded with feature but user can create application shortcuts to webpage on desktop. A handily feature that is also available in chrome is resizing areas like the comment box in the webpage. Besides that chrome is same like other browsers having basic bookmaking, full search engine functionality, password management etc.
Chrome logs more system resources than any other browsers chrome loads the site speedy but it had issues with heavy content sites.
Chrome is great but still at early stage to compare with established browsers.

Opera

Opera is a feature rich as firebox is but in narrowly loses out to the later. It has lots of feature that are hard to find in other browsers like e-mail. IRC & Bittorent clients etc. An option for controlling opera with voice commands is available, but it’s only for 2000/Xp has not been perfected yet. Operas mouse gesture is another feature which is useful for the someone who wants to navigate quickly. Data sharing is possible through the opera link a free service that synchronizes book-marks, speed dial entries, notes & other personal data between multiple computers.
Perspire boasting so many innovative & unique feature it disappoints as it is not yet, open source. Opera is erratic. Sometime its really quick but often lags behind the navigation time when compared to firebox & I.E
Opera disappoints on its Book-Marks as it does not provides on click bookmrking, editing & managing in ease. Password management still fit primitive with irritating boxes pop such when a password is entered. Search engine integration is not yet truthful, it provides mine default engine but does not provide good integration. Opera provide basic history management.

Internet Exploer-8

Microsoft latest offering is IE8 beta. Which claims its fast safe easy? Ie8 have lots of add-ons. Some free some non free
Accelators that provides easy access to various web services from any WebPages with just few mouse clicks. Another unique is web slices. Microsoft uses this technology to automatically trace sites. Using slices user can keep up frequently updated sites directly from favorite bar. Ie8 has a separate process for individual tab in browser windows.
Lacking feature is the download manager which is limited. IE still is copyright of Microsoft and no proper password mgmt.

Wednesday, November 5, 2008

How to set folder permission

Linux (and almost all other Unixish systems) have three user classes as follows:
  • User (u): The owner of file
  • Group (g): Other user who are in group (to access files)
  • Other (o): Everyone else

You can setup following mode on each files. In a Linux and UNIX set of permissions is called as mode:

  • Read (r)
  • Write (w)
  • Execute (x)

However, above three modes or permission have different meaning for file and directory:

Linux Read mode permissions

  • Read access on a file allows you to view file
  • Read access on a directory allows you to view directory contents with ls command

Write mode permissions

  • Write access on a file allows you to write to file
  • Write access on a directory allows you to remove or add new files

Execute mode permissions

  • Execute access on a file allows to run program or script
  • Execute access on a directory allows you access file in the directory

Octal numbers and permissions

You can use octal number to represent mode/permission:

  • r: 4
  • w: 2
  • x: 1

For example, for file owner you can use octal mode as follows. Read, write and execute (full) permission on a file in octal is
0+r+w+x = 0+4+2+1 = 7

Only Read and write permission on a file in octal is
0+r+w+x = 0+4+2+0 = 6

Only read and execute permission on a file in octal is
0+r+w+x = 0+4+0+1 = 5

Use above method to calculate permission for group and others. Let us say you wish to give full permission to owner, read & execute permission to group, and read only permission to others, then you need to calculate permission as follows:
User = r+w+x = 0+4+2+1 = 7
Group= r+w+x = 0+4+2+0 = 6
Others = r+w+x = 0+0+0+1 = 1

Effective permission is 761.

chmod command

To setup file permission you need to use chmod command:
chmod {mode} {file-name}

To setup file permission 761 you need to use chmod command as follows:
# chmod 0761 file
To setup a file readable by anyone and writable by the owner only:
# chmod 644 file
To setup a file readable/executable by everyone and writable by the owner only:
# chmod 755 file
You can change permissions for all files and directories within a directory by using the -R option on the chmod command. For example, to setup others read and execute access to all files and directories (and files and directories within directories), you need to type command as follows (i.e. change the modes of the file hierarchies rooted in the files instead of just the files themselves):
# chmod -R 755 directory-name/

However, Linux (and UNIX) stores and process user database in different format.

The root user

  • The root user is the super user.
  • The root user can control entire Linux system including files, process, applications etc. The root user has full access to system.
  • You should not use root for day-to-day tasks as root has full system access.
  • Never ever, give root password to anyone.

For more information see What defines a user account?

User database

  • User database is stored in /etc/passwd file
  • User passwords and password expiry information stored in /etc/shadow file

Group database

  • User group information is stored in /etc/group file

UNIX/Linux User rights

There are two types of user rights (traditional):

  • File level user rights or permissions granted using chmod and chown command
  • Administrative (root) level rights granted using sudo.

If you type the following command:

$ ls -l

You’ll see something like the following:

-rw-r--r-- 1 indiver webusers 14814 2006-07-26 13:25 working-nixcraft.txt 

Look at 3rd, 4th and last columns.

  • vivek is username or the owner of the file (userid)
  • webusers is group name, so all users in webusers can access file working-nixcraft.txt
  • working-nixcraft.txt is the file name.

As the root user you can change or setup user file related rights/permission using chmod and chown command.

Task: change file owner and group

Consider following example:

$ ls -l foo.txt

Output:

-rw-r--r-- 1 vivek webgroups 8 2006-08-08 17:57 foo.txt

Change files ownership to tony user:

# chown tony foo.txt
# ls -l foo.txt

Output:

-rw-r--r-- 1 tony webgroups 8 2006-08-08 17:57 foo.txt

Change foo.txt group to ftpusers:

# chown tony:ftpusers foo.txt
# ls -l foo.txt

Output:

-rw-r--r-- 1 tony ftpuseers 8 2006-08-08 17:57 foo.txt

You can also operate on files and directories recursively using -R option. For example setup /var/www/html ownership to user lighttpd including subdirectories:

# chown -R lighttpd /var/www/html

Task: change files access rights/permissions

You need to use chmod command. Please refer the old article - how Linux file permissions work.

Task: Grant administrative rights to a normal user

You need to use sudo tool. It allows a permitted user to execute a command as the superuser or another user, as specified in the /etc/sudoers configuration file.

A note for Ubuntu Linux users

You can use chmod and chown command to setup user rights. Make sure you prefix all commands with word (command) sudo:

$ sudo chown tony:ftpusers foo.txt

Q. How do I use chmod and chown command under Linux?

A. Use chown command to change file owner and group information. Use chmod command to change file access permissions such as read, write etc.

chown command

chown command changes the user and/or group ownership of each given file.

For example following command will setup user and group ownership to root user only for /backup directory:
# chown root:root /backup
Set user user ownership to root user and allow any member of ftp group to access file.txt (provided that they have sufficient read/write rights).
# chown root:ftp /home/data/file.txt

HOPE THIS TIPS WILL HELP TO KNOW THE THE BASIC COMMAND OF LINUX ADMIN

Red Hat Linux Video Player Installtion

You can use VLC or mplayer both can play movies, mp3, dvd and so on. However, these packages are not part of default installation and not supported by RedHat. You need to install 3rd party repo such as RPMforge to install the package.

For 34 bit version i386:
wgethttp://packages.sw.be/rpmforge-release/rpmforge-release-0.3.6-1.el5.rf.i386.rpm For 64 bit version x86_64
wgethttp://packages.sw.be/rpmforge-release/rpmforge-release-0.3.6-1.el5.rf.x86_64.rpm Now, type the following command to install packages vlc, mplayer and xmms:

yum install vlc mplayer xmms xmms-mp3

Use vlc to dvd and movies
vlc file.avi

Use mplayer to view dvd, tv, radio etc
mplayer *.mp3
mplayer file.avi

Use xmms to play mp3
xmms &

Dual boot linux and mac osx leopard kalyway 10.5.2



Dual boot linux and mac also we can make triple boot with vista is very hard than I think and finally I got it. I spent 3 days to did it succesfully. Ok, this is way of my installation. I made in single hard disk, Pentium 4 3.0ghz, 1 gig RAM, Nvidia geforce fx5500 256mb, 80 gig hard disk drive.

Preparation before make dual boot


1. You must already have Super Grub Disk before install all this method. Burn iso image in your mini cd. Find SGD at http://supergrub.forjamari.linex.org)

2. EasyBCD for windows. Download here: http://neosmart.net/dl.php?id=1

3. Vista OS, Mac OSX and Linux OS' dvd/cd.

4. Burn gparted iso in your mini cd.


Install vista in your pc

Vista or windows xp, it must install in first partition and absolutely you're already have it in your HD. But if you're advance user, forget my advice here. :p We can install windows anytime, anywhere actually...

After installing windows, you can use easyBCD and make a new MBR. Just choose linux, windows and vista in MBR. Good software for all download free here:
http://neosmart.net/dl.php?id=1

Install Vista first.. you can choose any partition.
After installing Vista, install EasyBCD and create Mac in MBR by EasyBCD.

##############################################################################

Linux
Ok, now I already have vista. Install linux in any partiton, I made logical partition and choose ubuntu 8.04.1 as primary and opensuse kde 4 as extended. I don't working with lilo, I was using grub. In terminal, edit menu.lst,

$ sudo gedit boot/grub/menu.lst

and add this below or above ubuntu title. It is from windows menu.lst. We will repair it later. Don't panic if it won't boot to mac.





title Mac OSX
root (hd0,0)
makeactive
chainloader +1


Reboot pc and restart linux back. Because I have two linux, so I boot to times to login to ubuntu and opensuse.

#################################################################################################

Mac OSX
Actually, you can install mac or linux before or after. It's up to you. I install mac osx 10.5.2 kalyway in my pc pentium 4. But after iatkos 10.5.4 release, I installed iatkos. This is how to install kalyway. To install iatkos 10.5.4, check out at my post here:
http://linux-guider.blogspot.com/2008/09/installing-iatkos-1054-is-easy.html

-Insert dvd, boot..
-press F8
-enter -v and wait. Grab your "Nasi Lemak or Roti Canai". Eat until macosx ready for next work.

- Utilities -> Disk Utility in the menu bar. Find the hard drive in the sidebar you want to install Leopard.
- Erase -> Mac OS Extended (Journaled) format. (Rename, no space or special character)
- quit Disk Utility and head back to the Installer.
- utilities - terminal
- enter this command

fdisk -e /dev/rdisk0
flag 2 <--note that flag 2 is my mac partiton number two
quit
y

then, you can quit terminal. Quit Disk Utility and head back to the Installer.

-Hit Continue at the Welcome screen, agree to the terms, and then be sure to hit the Customize button before proceeding with your installation.
-install package comes with individual settings that match specific motherboards. Buti I leave all default. I don't want to feel head-ache.
-When the installation is complete (around an hour), let your computer restart, pop out the install disc, and sit back in wonder as Leopard runs on your PC in full 10.5.2. Watch start-up movie and grab your "chicken chop". Register your profile and password and don't register to mac.

################################################################################################

WHAT HAPPEN IF I GOT HFS + ERROR?

After installing Mac, you will got error message in boot such as HFS+error in bootloader. USE SUPER GRUB DISK. SGD is useful tool for recover linux grub and windows MBR.

Free iso download here:
http://supergrub.forjamari.linex.org

Repair grub

Use super grub disc to REPAIR menu.lst. Just edit by type e and enter. Change hd0,0 to hd0,2. Test boot.. If fail.. change to hd0,3 or hd1.0 or whatever until it boot. All menu.lst attaced here is for example. If you have a doubt to boot mac or windows in grub, choose title mac osx in grub menu, we will edit it please enter:

e

on title macosx, change root (hd0,0) to

root (hd0,1)

it's mean, you will boot in partition number 1. Press enter and:

b

You will boot to mac osx or windows. If still doubt, you can try any number, Look mine here..





title Mac OSX
root (hd0,2)
makeactive
chainloader +1


WINDOWS GONE??

Repair windows startup using windows cd/dvd.

MAC OSX GONE?


Never gone, but it is hidden until you find it back with easybcd on WINDOWS or supergrub disk in linux.

REFIT?

I never use refit.. Please tell me what is refit?? lol

Conclusion
1. Before installing three of this OS, make sure you have make a back up copy of your important data.
2. Burn SGD in mini vcd and keep it as your important hardware.
3. Keep easyBCD.exe in you removable disk.
4. maybe gparted iso also useful.

Good luck!

how to speed up your youtube using squid

After struggled a week to find info how to cache youtube with squid proxy, ( the truth is, it is hard to cache youtube because of their multiple server redirection )

Use squid on linux!! I have successfully done it. You can save your limited bandwidth with squid proxy and cache

get it now..

Squid is a proxy http server that speeds up getting pages from the internet by keeping copies of commonly accessed pages or graphics instead of downloading them each time. To install it:-

On ubuntu, opensuse, mandriva, fedora, gentoo, arch etc, you can find in a repo by keyword squid. If you made any changes, you can reconfigure it using :

/usr/sbin/squid -k reconfigure (depending upon the installation location of squid)

Let's play fast youtube with ubuntu

1. From a root terminal type apt-get install squid

2. Open gedit /etc/squid/squid.conf

3. Find the TAG: visible_hostname and after the comments section add visible_hostname where is your machine’s hostname.

4. Check http_port is either set to 3128 or a port number that you can remember for configuring your browser.

5. Close and save

6. Type adduser squid and specify a password

7. Restart squid by typing: /etc/init.d/squid restart

8. Stop the service by typing /etc/init.d/squid stop

9. Test it in debug mode by typing squid -z (which creates the cache files)

10. Type squid -NCd10 to test squid in debug mode and leave it running.

11. Open Firefox and type the URL localhost:3128 or whatever port you chose. It will fail to retrieve a page, but at the bottom it will confirm that the error is generated by squid.

12. Back at the Terminal type CTRL-C to cancel the debug mode

13. Start squid for real with /etc/init.d/squid start. It will start automatically from now on.

14. To configure Firefox to use squid, go to Edit>Preferences and click Advanced.

15. Click Network>Settings and then Manual Proxy Configuration. For http proxy, enter localhost and for port 3128 (or whichever port you chose).

16. Then click OK and close the Preferences dialogue.

17. Now go to any webpage. If you get the page, it’s working

Yahoo-Mail-Configuring-Email-Client-(Mozilla Thunderbird)-on-Ubuntu-Debian-based


First you need to add the following line to source list file by editing the /etc/apt/sources.list file
$ sudo gedit /etc/apt/sources.list

Add the following line
deb http://tskariah.000webhost.com/ubuntu ubuntu main
Save and exit the file

Add the PGP public key for the new repository
$ wget http://tskariah.000webhost.com/t_skariah.asc.gpg -O- | sudo apt-key add -

Update the source list
$ sudo apt-get update

Install YPOPs!
$ sudo aptitude install ypops

Re-configure YPOPs! for Ubuntu
$ sudo dpkg-reconfigure -fgnome ypops

Other front-ends could be “dialog” (default), or “web”.The old /etc/ypops.ini would be saved as /etc/ypops.ini.bak
A dialog will popup with help for every option available .
Configuration note


Don’t check the ‘Add a new account’ in the first step unless you have multiple yahoo accounts.
If you’re installing YPOPs! on a LAN computer that acts as a router, replace the bind address 127.0.0.1 with the LAN address reachable by the other network PCs (192.168.1.1 or 10.10.0.1 for example).


How to start YPOPs! for Ubuntu manually
$ sudo /etc/init.d/ypops start

How to stop YPOPs! for Ubuntu manually:
$ sudo /etc/init.d/ypops stop

How to automatically start YPOPs! for Ubuntu at bootup
Use the configuration wizard.

How to remove YPOPs! for Ubuntu:
$ sudo apt-get remove ypops

Directory structure:
/etc/init.d/ypops - init script/etc/ypops.ini - config file/usr/bin/ypops - executable file/var/log/ypops/ - log directory/var/run/ypops.pid - pid file

WARNING: The log directory is readable by all. If the log-level is set to Advanced, YPOPs! would dump all the HTML pages there, which might contain private information.

If you want to configure Mozilla Thunderbird to access your yahoo email use the following steps
  • Click Tools-> Account Settings
  • Click Add Account button.
  • Choose Email account. Click Next
  • Type name and email address in the boxes. Click Next
  • Choose POP and type ‘localhost’ as the incoming server.
  • Depending on your preferences check or uncheck Use Global Inbox
  • Click Next. If your username is not already there by default, add it.
  • Click Next. Add the way you want your Account Name to look in Thunderbird.
  • Click Finish.

Now scroll down to the bottom of the Account Settings pane and click on Outgoing server (SMTP).Click on Advanced. Click on Add.
  • Type 127.0.0.1 as the outgoing mail server. Port default is 25.
  • Check Use name and password. This is Thunderbird’s way of enabling authentication.
  • Type your Yahoo user name as username@yahoo.com.
  • Click No to Use secure connection and then OK twice.
  • Click OK to the Server Settings window.

Now get back into Account SettingsGo back to the Server Settings of you Yahoo Account in the Account Settings pane.

Do not check Use secure connection (SSL) or Use secure authentication.
  • Click on Advanced.
  • Choose where you want your emails to go in the POP tab.
  • Click on the SMTP tab and click on the drop down menu and select 127.0.0.1:25
  • Continue modifying any of your preferences in the account and then click on OK.

The first time you try to access the account, Mozilla will ask for a password and if you want Mozilla to remember the password.